
Clock functions
Clock functions table
Clock function Application
Time of day To set, change or check the time of day.
Minute Minder To set countdown time. This function has no effect on the operation of the appli-
ance.
Duration To set the cooking time of the oven.
End To set the time of day when the oven should deactivate.
You can use the functions Duration
and End at the same time to set the
time for how long the appliance should
operate and when the appliance should
deactivate. This lets you activate the
appliance with a delay in time. First set
the Duration and then the End .
Setting the clock functions
For Duration and End , set an oven function
and temperature of cooking. This is not necessary for
the Minute Minder
.
1. Press again and again until the indicator for the
necessary clock function starts to flash.
2. Press or to set the time for the necessary
clock function.
The clock function operates. The display shows the
indicator for the clock function you set.
For the Minute Minder function the
display shows the time left.
3. When the time ends the indicator of the clock
function flashes and an acoustic signal sounds.
Press a button to stop the signal.
4. Turn the knob for the oven functions and the knob
for the temperature to the off position.
With the Duration and End
functions, the appliance deactivates
automatically.
Cancelling the clock functions
1. Press the again and again until the necessary
function indicator flashes.
2. Press and hold
.
The clock function goes out after some seconds.
Using the accessories
Warning! Refer to Safety chapters.
Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of the shelf
support and make sure that the feet point down.
Baking tray:
Push the baking tray between the guide bars of the
shelf support.
8
Comentários a estes Manuais